ENGINE
58
Engine : 4HX
Cylinder head gasket identification
X = MAXIMUM reusable length
NOTE : Grease the bolts on the threads and under the heads,
(using engine oil or Molykote G plus.
ESSENTIAL : Tighten screw by screw
and in the order indicated.
Pre-tightening 2 ± 0.2 (Order 1 to 10)
Tightening 6 ± 0.6 (Order 1 to 10)
Untightening 360° (Order 10 to 1)
Pre-tightening 2 ± 0.2 (Order 1 to 10)
Tightening 6 ± 0.6 (Order 1 to 10)
Angular tightening 220°±5° (Order 1 to 10)
(In 2 attempts max.)
B1DP05BC
4HX
X = 134.5 mm
Cylinder head tightening (m.daN)
4HX
Cylinder head bolts
CYLINDER HEAD (Continued)
B1DP15EC
To Next Page
Loading...
