ENGINE
61
AUXILIARY EQUIPMENT DRIVE BELT
Engines : 6FZ-RFN-RLZ
Without Aircon
With Aircon
TOOLS
[1] Pliers for removing plastic pegs 7504-T
Remove the belt.
- Detension the belt (3) by turning the tensioner roller (1), by the screw (2)
(anti-clockwise).
WARNING: the screw (2) has a left hand thread.
- Remove the belt (3), while keeping the tensioner roller (1) tensioned.
Refit the belt.
- Compress the tensioner roller (1).
- Fit the belt (3).
- Release the tensioner roller (1).
Tightening torques m.daN.
Tensioner roller screw (4) 2 ± 0.2
Guide roller screw (5) 3.5 ± 0.3
B1BP23QC
B1BP23PC
B1BP23RC
To Next Page
Loading...
