On the front bumper, unclip the cover by
pressing at the bottom.
Screw the towing eye in fully.
Install the towing bar.
On the rear bumper, unclip the cover by
pressing at the bottom.
Screw the towing eye in fully.
Install the towing bar.
Switch on the hazard warning lamps on
both vehicles.
Move off gently, drive slowly and for a short
distance.
Towing your vehicle Towing another vehicle
Place the gear lever in neutral
(position N on an electronic or
automatic gearbox).
Failure to observe this instruction
could result in damage to
certain components (braking,
transmission...) and the absence
of braking assistance the next time
the engine is started.
Unlock the steering by turning the key
in the ignition one notch and release the
parking brake.
Switch on the hazard warning lamps on
both vehicles.
Move off gently, drive slowly and for a short
distance.
To Next Page
Loading...
