Driving safely
Activate the function by pressing control
switch A ; the warning lamp comes on in the
switch.
Blind spot sensors
222
The warning lamp located in the door mirror
comes on to warn you that a vehicle has arrived
in the blind spot detection zone.
Select the function by pressing control
switch B ; the corresponding warning lamp
comes on in the instrument panel.
Operate the direction indicators on the side
with the space to be measured; a message
appears to confirm measurement is in
progress.
Drive at a speed below 12 mph (20 km/h)
during measurement.
Parking space sensors
One of these messages appears to indicate
the level of difficulty of the manoeuvre:
- Parking possible.
230
- Parking difficult.
- Parking not advised.
To Next Page
Loading...
