Citronic CDM10:4 - Introduction and Maintenance; Introduction; Maintenance; Packing Contents

171.135UK User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Introduction
Thank you for purchasing the Citronic CDM10:4 USB Rackmount DJ Mixer.
This product is intended to give long term, reliable service in normal usage.
Please read these instructions before use to avoid incorrect operation and to help outline the
functions and controls.
Maintenance
No user serviceable parts inside, refer all servicing issues to qualified service personnel. Clean with
a lint-free dry or damp cloth. To replace cross-fader, disconnect mains and undo the 2 securing
screws slightly, lift the cross-fader and disconnect from the in-line connector (noting the correct
orientation). Connect the new cross-fader, reposition and secure with the 2 screws. Channel,
Master and Booth faders may be serviced or replaced by removing the plate that they are fitted to.
Packing Contents
 IEC Mains cable
 CDM8:4 USB 19” DJ Mixer
 Instruction Manual