CLA-VAL CV-Log-35 - Page 3

CLA-VAL CV-Log-35
Quick Start Guide
 CLA-VAL Europe www.cla-val.ch cla-val@cla-val.ch 3 - CLOG35SE D 07/23
© Copyright CLA-VAL Europe - Specifications subject to change without notice - no contractual illustrations. Reduce your waste - Sort your rubbish
4 BASIC SYSTEM SETTINGS
1. Click on the " System" menu.
2. Give your CV-Log-35 a name.
3. Select the language of the interface.
4. Select your time zone using the "DETECT" button. If the time zone is not detected automatically, you can choose it
manually with the "Time Zone" drop-down menu.
5. Click on "SAVE SETTINGS" for the changes to be applied.
6. Click on "SYNCHRONIZE NOW" to update your unit's clock immediately.
This operation can only be performed if the CV-Log-35 is connected to the cellular network (option). If not, go directly to
step 7.
7. Check that the time displayed on the clock under the navigation menu is correct. If not, you can manually set the time in
"Manually set date and time". Click on "SET DATE AND TIME" to have the change applied.
2.
3.
4.
1.
5.
6.
7.
7.