4.1.6 BA LEXION 460 - 410 - 298 425.0
Safety rules
Battery master switch
The overall power supply to the machine can be
isolated with the battery isolating switch (H).
E = ON (switch on by turning clockwise)
A = OFF (switch off by turning counter-clockwise)
Turn the battery master switch off in emergencies and
every day when the works is finished.
ATTENTION!
Never turn the battery isolating switch off
when the engine is running.
(Fig. 4)
Wheel chocks
(Not for all countries)
The combine is equipped with two wheel chocks from
the factory. The brackets holding the wheel chocks are
located on the left-hand machine side behind the fan
guard. The wheel chocks must be carried on the
machine at all times.
When leaving the combine on uneven ground, both
wheel chocks must always be placed under the
traction wheels.
(Fig. 5)
Positioning the wheel chocks
Always place the wheel chocks in front of or behind the
front traction wheels (depending on the slope of the
ground) on both sides of the combine.
Always position the wheel chocks so that the combine
cannot roll away.
Completely open the wheel chocks and place as close
to the traction wheels as possible.
(Fig. 6)
4
5
6
To Next Page
Loading...