298 425.0 - BA LEXION 460 - 410 1.1.1
Introduction
INTRODUCTION
This manual applies to CLAAS LEXION 460 / LEXION
450 / LEXION 440 / LEXION 430 / LEXION 420 and
LEXION 410 Combine Harvesters.
It is intended to give the machine operator information
on setting, using and servicing the CLAAS Combine
Harvester.
Texts and pictures apply, in general, to all combine
models covered by this manual, and the information
given applies equally, except where reference is made
to a particular model in captions to the pictures or in
the main text.
Operation and maintenance of important ancillary
equipment is also covered by this manual. A separate
Operator's Manual is available for cutterbars.
Please read the instructions which apply to the
appropriate ancillary equipment on your combine.
Provided you follow the advice on the care and
servicing of your machine you will be rewarded with
reliable and long service from your Combine
Harvester.
We recommend that you allow your authorized
CLAAS Dealer to carry out the regular maintenance.
Omissions of parts of the maintenance schedule or
incorrect operation lead to a drop in performance and
cost valuable time. By correct servicing and operation
you can make full use of our sound experience and of
the latest technical knowledge in combine harvesting
with which your combine has been designed and
thereby ensure reliability of your Combine Harvester.
This Operator’s Manual can be ordered from your
CLAAS Dealer as well as the manuals listed below:
• Threshing Instructions for special crops
• Fitting and Operating Instructions for ancillary
equipment
CLAAS Service Department
Introduction
Find manuals at http://best-manuals.com/search?&s=CLA-2984250
To Next Page
Loading...
