PROXIMA STX
Ice-Cream Cabinet
ENGLISH
11
3.
RECEIPT AND INSTALLATION
WARNING:
Before acceptance of the equipment, control the following:
• the package must be intact and the
products haven’t to be damaged during
transport.
• the shipped goods correspond to the order specifications.
• the presence and integrity of accessories.
•
possible damages occurred on products must be reported on the transport
document for the compensation by the transport agency.
WARNING:
This product must be installed by qualified personnel. During installation the operators
involved must wear individual protection devices.
WARNING:
The installation of Remote Condensing Units (where available), must be perf
qualified personnel, following the instruction reported on manual delivered with the
condensing unit itself and supplied by the factory.
3.1
LIFTING AND MOVEMENT
In order to move the cabinet from the transport vehicle use a fork lift having the suitable
loading capacity as follow (Fig.2):
• Position the forks at the level of vehicle (e.g.
lorry)
• Move forward with the forks so as to insert them
under the cabinet’s pallet.
• Ensure that the cabinet is perfectly balanced on
the forks before lifting it.
• Position the cabinet on the ground and remove
the package.
WARNING:
During the package wasting, using devices such as cutter
could cause injuries to people
or damages to product.
In addition, avoid to smear against the p
roduct with metallic parts such as watches,
buckles, chains, rings and so on that could produces scratches.
Fig.2
To Next Page
Loading...
Need help?
General