Nitrogen and pure air generator NitroAir
11
4.2.4.
Cap application
Apply the four caps include in the supply on the four holes on the top panel .
4.3.
Pneumatic connections
The fittings for the connection are located on the rear of the generator and are
of the automatic type.
The supply includes two kinds of connectors; one to perform the connection with
the 1/8” copper tube for pure aire and Nitrogen (A) and the other one to connect
the silencer to the drain with a 4 tube (B).
The generator is delivered with the vent of the air and of Nitrogen closed by a
cap, that obviously has to be removed before of performing the connection.
To Next Page
Loading...
