Use
18
6.7.2.
Display of working hours
The generator is equipped with an hour counter of the compressor displaying
also the remaining working our of some components before of their substitution
in order to guarantee a correct maintenance.
To display the working hour, go to main page (
PRODUCTION
) and presse
once the down arrow key .
To exit from this page and come back to main page, press once up arrow key .
6.8.
Setting of the parameters
To access to these parameters you have to switch the generator on pressing for
some seconds the Function key .
The data will be sequenced as indicated in the table above.
To modify them, press the arrow keys .
To acquire the set value, press the up arrow key ; while pressing the function
key . With this operation you access also to the following parameter.
Finally, to quit the menu, press for some second the Function key .
6.8.1.
Editing maintenance parameters
See par. Maintenance.
Language of messages
Italian
English
German
French
Spanish
Restoration of the production after incorrect switch off
Manual
Automatic
Incorrect switch off alarm
Enabled
Disabled
To Next Page
Loading...
