DOC ID - 1539 • Rev 09 1 / 9
ClareVision Plus NVRs
Quick-Start Guide
Content
Introduction...1
Included...2
Search Active Device Protocol (SADP) Tool...2
Troubleshooting...2
Installation Options.s..2
Creating and using a ClareVision Plus account...5
Warranty Information...9
Support...9
Last modified: 01/23/19
Introduction
Thank you for choosing Clare Controls. In today’s competitive market place, we
can appreciate that you have many choices for your home automation needs.
This document is intended as a quick-start guide, not a full product guide. For
more information, view the full ClareVision Plus Network Video Recorder User
Guide (DOC ID 1431 Rev 03).
Pre-Setup Steps
Follow the below steps before adding the ClareVision Plus NVRs to your project.
1. Plug all cameras into the PoE ports on the back of the NVR using CAT 5/6
data cable.
2. Using another data cable, connect the NVR to your home network
(router/modem).
3. Using the supplied power cable, plug the NVR into any standard wall outlet.
To Next Page
Need help?
General
