Need help?Do you have a question about the Clare Controls ClareVision Plus and is the answer not in the manual?
Specifies the extent of liability for damages and failures related to the product.
Defines the purpose of advisory messages and their role in alerting users.
Details the terms and conditions of the product's limited warranty.
Describes the components and buttons on the NVR's front panel.
Details the various ports and connectors on the NVR's rear panel.
Explains how to use the infrared remote control for NVR functions.
Covers USB mouse operation and on-screen keyboard input methods.
Provides procedures for properly starting, shutting down, and rebooting the NVR.
Guides through the initial activation and setup wizard for the NVR.
Explains the process for user authentication and session management.
Details the steps for activating, adding, and configuring IP cameras.
Explains on-screen icons and available Live View display modes.
Describes the functions available through the Live View quick settings.
Customizes output interfaces, dwell times, and screen arrangements.
Optimizes bandwidth for remote viewing by reducing stream quality.
Configures communication parameters for PTZ-enabled cameras.
Programming camera movement sequences and specific viewpoints.
Configures automatic camera movements after a period of inactivity.
Sets image quality, stream type, resolution, and bitrate for recording.
Sets up recording and capture triggered by motion detection events.
Configures recording based on external alarm inputs.
Protects recorded files by locking them or setting HDD to read-only.
Navigating and utilizing the playback interface and its toolbar.
Methods for playing back video by channel, event, tag, or smart analysis.
Correlating recorded video playback with system log entries.
Features like frame-by-frame playback, digital zoom, and file management.
Exporting files rapidly to backup devices like USB drives.
Backing up files based on normal searches or specific events.
Managing USB drives and HDDs, including formatting and folder creation.
Setting up motion detection areas, sensitivity, and response actions.
Configuring external sensor alarms, video loss, and tampering detection.
Configuring responses to exceptions like HDD errors or network disconnection.
Defining system reactions to alarms: hints, full screen, audible warnings, email.
Configuring alarms for face detection and recognition.
Setting up detection for vehicles and line crossings.
Configuring alarms for unauthorized entry into defined areas.
Covers people gathering, parking, unattended baggage, and object removal detection.
Setting up IP address, subnet mask, gateway, and DNS server.
Configuring remote access, dynamic DNS, and cloud connectivity.
Setting time synchronization, SNMP, and remote alarm monitoring.
Setting up port forwarding for remote network access.
Monitoring network performance and connection status.
Setting up redundant arrays of independent disks for data protection.
Methods for creating RAID arrays, including quick and manual configurations.
Procedures for array maintenance, including rebuilding and deletion.
Steps to initialize HDDs before they can be used by the NVR.
Adding network storage (NAS/IP SAN) and managing eSATA devices.
Organizing HDDs into groups and setting properties like Read/Write.
Configuring storage quotas per camera and cloning disk data.
Monitoring HDD health, detecting errors, and checking S.M.A.R.T. status.
Customizing camera name, date, time, and other display overlays.
Setting up privacy mask zones to hide sensitive surveillance areas.
Adjusting brightness, contrast, saturation, and hue for camera images.
Accessing device, camera, record, alarm, network, and HDD status.
Finding and exporting system operation, alarm, and exception logs.
Managing camera info and system configuration files for backup or transfer.
Updating the NVR's firmware from a local device or remote FTP server.
Resetting the NVR to its factory default configuration.
Explains NVR limitations based on camera stream bit rates.
Setting up serial communication parameters for PC or device connection.
System configurations for language, display, time zones, and system behavior.
Adding, editing, and assigning permissions to system users.
Resolving problems with monitor connections, cables, and input modes.
Troubleshooting boot warnings and HDD initialization or detection issues.
Resolving 'Disconnected' status, online/offline camera problems, and bandwidth issues.
Addressing issues with frozen live views, packet loss, and hardware performance.
Troubleshooting issues related to incorrect system time or search conditions.
General| Brand | Clare Controls |
|---|---|
| Model | ClareVision Plus |
| Category | Security Camera |
| Language | English |
To Next Page
