Clare Controls ClareVision Plus - Checking the Network Status

Network Settings
ClareVision Plus Network Video Recorder User Manual 141
4. Click Refresh when the connected local backup device cannot display.
If it fails to detect the backup device, check if it is compatible with the NVR.
You can format the backup device when the format is incorrect.
5. Click Export to start exporting.
6. Click OK to finish the packet export.
Note: Up to 1M data is exported each time.
Checking the network status
You can also check the network status and quickly set the network parameters in
this interface.
To check the network status:
1. Click Status on the bottom right corner of the page.