Playback
ClareVision Plus Network Video Recorder User Manual 75
3. Set Alarm Input Motion or VCA as the event type, and then edit the Start and
End time.
4. Select the VCA minor type from the drop-down.
5. Select the desired cameras, and then set the Start time and End time.
6. Click Search for result information. Refer to the right-side bar for the result.
7. Click to play the file.
Note: You can configure pre and post play.
8. Use the toolbar at the bottom of the Playback interface to control playback.
Playing back by tag
Video tags let you mark specific points in recording. Use tags to search for
people, locations, or set custom tags. Use video tags to search for recorded files
and position time points.
To Next Page
Loading...
