Clare Controls ClareVision Plus - USB Mouse and Input Methods

Introduction
ClareVision Plus Network Video Recorder User Manual 13
USB mouse operation
A regular 3-button (Left/Right/Scroll-wheel) USB mouse works with the NVR.
To use a USB mouse:
1. Plug the USB mouse into a USB interface on the NVR’s front panel.
2. The mouse is detected automatically. If the mouse is not detected, it is
possible that the two devices are not compatible. Refer to the recommended
devices list from your provider.
Table 10: Mouse control
Name
Action
Description
Left-click
Single-click
Live view: Select channel and show the quick set menu.
Menu: Select and enter.
Double-click
Live view: Switch between single-screen and multi-screen.
Click and drag
PTZ control: Pan, tilt and zoom.
Video tampering, privacy mask and motion detection:
Select target area.
Digital zoom-in: Drag and select target area.
Live view: Drag channel/time bar.
Right-click
Single-click
Live view: Show menu.
Menu: Exit current menu to previous menu.
Wheel- scroll
Scrolling up
Live view: Previous screen.
Menu: Previous item.
Scrolling down
Live view: Next screen.
Menu: Next item.