15 Network Video Recorder User Manual
Getting Started
Starting up and shutting down the NVR
Proper startup and shutdown is crucial to expanding the life of the NVR. Before
you start, check that the voltage of the extra power supply matches the NVR’s
requirement, and that the ground connection is working properly.
Starting up the NVR
Start the NVR to access its features.
To start the NVR:
1. Check that the power supply is plugged into an electrical outlet. We
recommend that you use an Uninterruptible Power Supply (UPS) with the
device. The Power indicator LED on the front panel is red, indicating the
device is getting power.
2. Press the power button on the front panel. The power indicator LED turns
blue, indicating start up.
3. After startup, the Power indicator LED will remain blue. A splash screen with
the status of the HDD appears on the monitor. Click the Live View screen to
view the Quick menu. The Quick menu, a row of icons at the bottom of the
screen, shows the HDD status. ‘X’ means that the HDD is not installed or is
not detected.
4. On the Live View screen, right click for the Right-click menu to appear, see
Figure 12 below. Click Menu, on the top of the Right-click menu to display the
Top menu, see Figure 13 below. From the Top menu, configure the advanced
settings or shutdown the NVR.
To Next Page
Loading...
