Network Settings
ClareVision Plus Network Video Recorder User Manual 131
Configuring server and HTTP ports
You can change the server and HTTP ports in the Network Settings menu. The
default server port is 8000 and the default HTTP port is 80.
To configure the server and HTTP ports:
1. Browse to the Network Settings interface.
Menu > Configuration > Network
2. Click the More Settings tab.
3. Enter the server port and HTTP port in the text fields.
4. The default server port is 8000.
Note: The server port is set in the range of 2000 to 65535. Use it for remote
client software access. The HTTP port is used for remote IE access. The
default HTTP Port is 80. You can change them according to your
requirements.
5. Click Apply to save and exit the interface.
Configuring the HTTPS port
HTTPS provides authentication of the web site and the associated web server.
Note: The HTTPS port must be configured using a web-browser.
To configure the HTTPS port:
1. Open your web-browser, and then enter the device’s IP address in search
bar.
2. Enter the username and password, and then click Login.
3. Browse to the HTPPS settings interface.
Configuration > Remote Configuration > Network Settings > HTTPS
To Next Page
Loading...
