Clare Controls ClareVision Plus - Configuring Network Detection; Exporting Network Packets

Network Settings
140 ClareVision Plus Network Video Recorder User Manual
Configuring network detection
You can obtain the network connection status of the NVR through the network
detection function, including network delay and packet loss.
To test network delay and packet loss:
1. Browse to the Network Traffic interface.
Menu > Maintenance > Net Detect
2. Click the Network Detection tab.
3. Enter the destination address in the Destination Address field.
4. Click Test to start testing network delay and packet loss.
The testing result display in the window. If the test fails, the error message
displays.
Exporting network packets
By connecting the NVR to network, the captured network data packet is exported
to a USB flash drive, SATA/eSATA, or other devices.
To export network packets:
1. Browse to the Network Traffic interface.
Menu > Maintenance > Net Detect
2. Click the Network Detection tab.
3. Select the backup device from the list.