Other Settings
ClareVision Plus Network Video Recorder User Manual 177
Configuring more settings
To configure more settings:
1. Browse to the General Settings interface.
Menu > Configuration > General
2. Click the More Settings tab.
3. Configure the following settings:
Device Name: Edit the name of NVR.
Device No.: Edit the serial number of NVR. The device number is set in the
range from 1 to 255. The default number is 255. It is used for the remote and
keyboard control.
Auto Logout: Set timeout time for menu inactivity. For example, when the
timeout time is set to five Minutes, the system will exit from the current
operation menu to the Live View screen after 5 minutes of menu inactivity.
Enable HDMI/VGA Simultaneous Output (64-channel NVRs only):
By default, the video outputs form HDMI and VGA interfaces operate
separately. Set the simultaneous output for the HDMI and VGA by selecting
the checkbox.
Menu Output Mode: You can choose the menu display on different video
output. There are auto, HDMI, VGA and Main CVBS selectable.
VGA2/HDMI2: Set the menu output mode to VGA, HDMI or Auto. When Auto
is selected and both the VGA and HDMI outputs are connected, the device is
detected and sets the menu output to HDMI.
4. Click the Apply button to save the settings.
To Next Page
Loading...
