Alarm Settings
ClareVision Plus Network Video Recorder User Manual 103
Detecting video tampering alarm
Alarms trigger when the lens is covered and takes alarm response actions.
To detect video tampering:
1. Browse to the Video Tampering interface, and then select a channel.
Menu > Camera > Video Tampering
2. Check the Enable Video Tampering check box.
3. Drag the sensitivity bar to choose a proper sensitivity level.
4. Using the mouse, draw an area to detect video tampering.
5. Click to set the handling action for video tampering.
6. Click the Arming Schedule tab to set the arming schedule for handling
actions.
7. Select a day of a week and up to eight periods for that day.
8. Click Apply to save the settings.
Note: Do not repeat or overlap times.
To Next Page
Loading...
