Clare Controls ClareVision Plus - Triggering or Clearing Alarm Output Manually

Alarm Settings
ClareVision Plus Network Video Recorder User Manual 107
5. Repeat the above steps to set an arming schedule for the other days of a
week.
– or –
Click Copy to copy an arming schedule to other days.
6. Click OK to complete the video tampering settings of the alarm output.
You can also copy the above settings to another channel.
Triggering or clearing alarm output manually
Sensor alarms are triggered and cleared manually. When you select Manually
Clear from the Dwell Time list, you must clear the alarm by clicking Clear in the
Manual Alarm interface, Menu > Manual > Alarm.
• Click Trigger/Clear to trigger/ clear an alarm output.
• Click Trigger All to trigger all alarm outputs.
• Click Clear All to clear all alarm output.