How to fix Clarion BLT370 when the power does not turn on?
If the power of your Clarion Transceiver unit isn't turning on, it might be due to a blown fuse. Replace the fuse with one of the same amperage (2A) in the LC box. If it blows again, it's recommended to consult your store of purchase. Another potential cause is incorrect wiring, in which case consulting your store of purchase is also advised.
What to do if I cannot pair my Clarion BLT370 car handsfree with my phone?
If you can't pair your car handsfree with your phone, ensure that the Bluetooth® function on your phone is set to Automatic or On, and that your phone is inside the car during the pairing procedure. Also, confirm that the car handsfree is on. If this doesn't work, try turning on multiple re-connection mode and restarting the Transceiver.
Why is there no sound between my Clarion BLT370 car handsfree and phone?
If there is no sound contact between your car handsfree and phone, first ensure that the car handsfree and the phone are paired and within range of each other. If they are paired, check the car stereo volume. If it's too low, increase the volume in the Transceiver unit or the car stereo.
What to do if my Clarion BLT370 Transceiver cannot connect to the car handsfree?
If you cannot connect to the car handsfree, it might be because the car handsfree or your phone is connected to another Bluetooth® device. Disconnect any other Bluetooth® devices, as some phones can only be paired with one handsfree device at a time. Check your phone's manual for more information.
What to do if blue LED lights up all the time and Clarion Transceiver is not responding?
If the blue LED lights up all the time and the Clarion Transceiver is not responding, it may have malfunctioned due to conflicts like multiple pairings at the same time. To resolve this, power off and then on the device until the blue LED blinks correctly.
Why is the red or purple LED light always on in my Clarion BLT370 Transceiver?
If the red or purple LED lights up all the time on your Clarion Transceiver, it indicates a power-up failure. Power off and on the device until the blue LED blinks correctly. If that doesn't work, press the reset button.
How to enable telephone call interruption on Clarion BLT370 Transceiver car stereo?
If the telephone call is not interrupted to the car stereo, it means the telephone interrupt is off. Set the telephone interrupt to ON to resolve the issue.
Why does pressing the keypad mute audio when my Clarion BLT370 Transceiver is paired with my phone?
When the Clarion Transceiver is paired with certain mobile phones (e.g. Nokia 6233), pressing the keypad of the mobile phone might cause the audio streaming from the Transmitter to be muted because any audio activities, including keypad tones, are transmitted to the Transceiver unit. Depending on your mobile phone software, turning off the keypad tones and alert tones may resolve this issue.
Illustrates system connections and provides step-by-step installation instructions.
Details Velcro mounting, placement options, and installation cautions.
Details how to stream audio and control playback functions.
Guides on making, answering, rejecting, ending, and transferring calls.
Explains critical limitations and requirements for making emergency calls.
General| Brand | Clarion |
|---|---|
| Model | BLT370 |
| Category | Transceiver |
| Language | English |
To Next Page