CD037RMP
-5-
PIN P-NAME I/O Act DESCRIPTION When not Used REMARK
61 MONO
/AUX OUT
/DIO IN8
O H 1. Forced mono control output (High=mono).
2. AUX output (High = AUX mode).
3. Option diode input 8.
Open
62 MP3_REQ
/DIO IN7
I L 1. MP3 request input from MP3 module.
2. Option Diode input7.
63 BEEP
/FUNC
/DIO IN6
O 1. BEEP SOUND OUTPUT
It should be connected with the normal audio
signal.
Unless special requirement, it is recommended to
be
connected to front CH of audio signal.
2. FUNC OUT (FUNC=HIGH)
3. Option diode input 6.
64 SENS1_O
/DIO IN5
O H 1. For the optical loading S/W,
Connect to the Anode of loading sens LED of CDP
with TR for AUTO POWER ON
2. Option Diode input 5.
To Next Page
Loading...
Need help?
General
