Clarion DRX5375R User Manual

ADS Operations
Volume setting of TA, emergency
(ALARM) and PTY
You can set the volume of TA, ALARM and PTY
to a desired level.
* The factory setting is “TA VOL 9”.
1. Press and hold TA button [7] for 2 seconds or
longer to enter TA VOL ADJ mode.
lf the control is idle for 7 seconds after the TA
VOL ADJ mode has been entered, the dis-
play returns to radio mode display automati-
Cally.
2. Select up or down to set the volume level us-
ing a-selector [2].
> 7H pM. oO
7 7A WoL: Ges
far] [7a f1P] ST
* The volume remains unchanged if the volume
before the TA, ALARM and PTY broadcasts are
received is higher than the previously set vol-
ume.
If it is lower, the volume changes to the level
set in TA VOL ADJ mode.
3. Press TA button /7/ to complete volume setting.
CT (Clock Time) function
The CT function enables you to display clock time
only when CT data is received.
While pressing and holding BAND button [fg],
press the number 4 of the Preset buttons [15] to
switch the display.
* When no CT data is received, “CT--:-~—” ap-
pears in the display.
Note:
© There are some countries and stations where clock
time data are not transmitted. In some areas, the
CT may not be displayed correctly.
ARXYRA7ED 1 §

Clarion DRX5375R Specifications

General

Brand	Clarion
Model	DRX5375R
Category	Car Receiver
Language	English