EasyManuals Logo

Clarion DXZ545MP User Manual

Clarion DXZ545MP
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
280-8005-00
DXZ545MP 15
English
Radio Operations
Quick tuning:
Press and hold the [a] or [d] button for 1
second or longer to tune in a station.
Step tuning:
Press the [a] or [d] button to manually
tune in a station.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio sta-
tions in memory. Pressing the corresponding
[DIRECT] button recalls the stored radio fre-
quency automatically.
1. Press the [BND] button and select the de-
sired band (FM or AM).
2. Press the corresponding [DIRECT] button to
recall the stored station.
Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store that station
into preset memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
Auto store
Auto store is a function for storing up to 6 sta-
tions that are automatically tuned in sequentially.
If 6 receivable stations cannot be received, a
previously stored station remains unoverwritten
at the memory position.
1. Press the [BND] button and select the de-
sired band (FM or AM).
2. Press and hold the [P/A] button for 2 sec-
onds or longer. The stations with good recep-
tion are stored automatically to the preset
channels.
Preset scan
Preset scan receives the stations stored in pre-
set memory in order. This function is useful
when searching for a desired station in memory.
1. Press the [P/A] button.
2. When a desired station is tuned in, press the
[P/A] button again to continue receiving that
station.
Note:
Be careful not to press and hold the [P/A] button
for 2 seconds or longer, otherwise the auto store
function is engaged and the unit starts storing
stations.
Instant station recall (ISR)
Instant station recall is a special radio preset
that instantly accesses a favorite radio station at
a touch of a button. The ISR function even oper-
ates with the unit in other modes.
ISR memory
1. Select the station that you wish to store in ISR
memory.
2. Press and hold the [ISR] button for 2 seconds
or longer.
Recalling a station with ISR
In any mode, press the [ISR] button to turn on
the radio function and tune the selected radio
station.ISRappears in the display. Press the
[ISR] button again to return to the previous
mode.
+DXZ545MP-009-ENG 11/5/03, 5:01 PM15

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Clarion DXZ545MP and is the answer not in the manual?

Clarion DXZ545MP Specifications

FM Tuner IconFM Tuner
frequency range87.9 MHz to 107.9 MHz
usable sensitivity9 dBf
50dB quieting sensitivity15 dBf
alternate channel selectivity70 dB
stereo separation (1 kHz)35 dB
frequency response (±3 dB)30 Hz to 15 kHz
AM Tuner IconAM Tuner
frequency range530 kHz to 1710 kHz
usable sensitivity25 µV
CD Player IconCD Player
frequency response (±1 dB)5 Hz to 20 kHz
signal to noise ratio (1 kHz)100 dB
dynamic range (1 kHz)95 dB
harmonic distortion0.01%
Audio IconAudio
maximum power output208 W (52 W ✕ 4 ch)
continuous average power output17 W ✕ 4, into 4 Ω, 20 Hz to 20 kHz, 1%THD
bass control action (50 Hz/80 Hz/120 Hz)+16 dB, -12dB
treble control action (8 kHz/12 kHz)±12 dB
line output level (CD 1 kHz)1.8 V
General IconGeneral
power supply voltage14.4 V DC (10.8 to 15.6 V allowable), negative ground
current consumptionLess than 15 A, 3A
speaker impedance4 Ω (4 Ω to 8 Ω allowable)
weight / source unit2.86 lb. (1.3 kg)
weight / remote control unit1 oz. (30 g) (including battery)
dimensions / source unit7" (Width) ✕ 2" (Height) ✕ 6-1/8" (Depth) [178 (W) ✕ 50 (H) ✕ 155 (D) mm]
dimensions / remote control unit1-3/4" (Width) ✕ 4-5/16" (Height) ✕ 1-1/8" (Depth) [44 (W) ✕ 110 (H) ✕ 27 (D) mm]

Related product manuals