280-8001-01
DXZ748RMP 25
English
Setting the 2-ZONE function
The initial setting is “OFF”.
When you have set the 2-ZONE function to “ON” in
the initial state, the MAIN zone services for sources
inside this unit and the SUB zone, for AUX. Chang-
ing a source during later use causes the latest heard
source to be invoked.
Press and hold the [ ] button for 1 second or
longer to turn on or off. When the 2-ZONE func-
tion is turned on, “2-ZONE ON” on the display
lights.
Switching sources
1. Press the [ ] button to select the control
zone (“MAIN” or “SUB”).
Every time the button is pressed, the “MAIN
ZONE” changes to the “SUB ZONE” or vice
versa.
“MAIN” or “SUB” on the display lights at that
time, thereby indicating that the relevant
zone becomes ready to operate.
2. Press the [FNC] button to select a source in
the control zone.
Every time the button is pressed, the follow-
ings appear in turn.
● For a source group included in this unit:
Radio ➜ CD/MP3 ➜ AUX ➜ Radio...
● For a source group in external equip-
ment:
AUX ➜ CD changer ➜ DVD changer ➜ TV
➜ AUX...
∗ The name of equipment that is not connected
to this unit is not displayed.
• To change a current musical performance etc., press
the button that controls the selected source ([SCN]
button, etc.).
Different pieces of music heard by plural listeners (2-ZONE function)
Oparation
2-ZONE
turned off
2-ZONE
turned on
2-ZONE
turned off
Source
change
2-ZONE
turned on
MAIN zone
Radio playback
Radio playback
Radio playback
External
equipment (CD
changer)
External
equipment (CD
changer)
SUB zone
Radio playback
AUX
Radio playback
External
equipment (CD
changer)
Radio playback
Adjusting the sound level for the
MAIN zone
You can adjust the sound level only for the MAIN
zone. To adjust the sound level for the SUB zone,
adjust it in the headphone (WH143/WH143H) side.
Turning the [ROTARY] knob to adjust the sound
level for the MAIN zone.
Counterchanging the sources of the
MAIN and SUB zones
You can supersede the music sources of the MAIN
and SUB zones.
Press and hold the [TA] button for 1 second or
longer to counterchange the sources of the MAIN
and SUB zones.
“REVERSE” is displayed for 2 seconds on the dis-
play.
● Example for source change
+DXZ748RMP-009-ENG 1/14/04, 11:02 AM25
To Next Page
Loading...
