Clark C300 40 - Page 14

Safety
21. Thoroughly inspect
all loads to be moved
for overload and/or
poor balance. If the sta-
bility of a load is ques-
tionable, don't move it.
23. Before lifting check
to insure adequate un-
obstructed overhead
clearance.
Gradually and smoothly
pull back on lift control
lever. Return lever to
neutral to stop lift at
desired level.
22. Unstable loads are a
hazard to you and to
your fellow workers. Al-
ways make certain that
your load is well
stacked and evenly posi-
tioned across both
forks. Never attempt to
lift a load with only one
fork.
24. Push forward on
control lever to lower
load.
Descent of load may be
stopped at desired level
by returning lever to
neutral position.
13693
14972
Page8
Code: OI-345, REV. May 84