Do you have a question about the Clark C50sD and is the answer not in the manual?
Daily inspection is mandatory; do not operate trucks needing repair. Use trained mechanics for repairs.
Keep body within confines, under overhead guard; never walk under raised forks.
Explains tip-over causes (speed, turns, loads) and the critical instruction: DO NOT JUMP.
Loose or unbalanced loads are dangerous; stack and band loose material securely.
Allow more room for long/wide loads; watch for rear swing when turning.
Check overhead clearance; slow down before turning; never turn on a grade.
Secure trailers with brakes and chocks before forklift entry to prevent movement.
Explanation of Key/Start Switch, Seat Adjustment, Brakes, and Parking Brake functions.
Information on model, serial number, capacity rating, load center, and lifting height.
Information on Upright, Forks, and Hot Surface warning decals.
Inspect truck, read manual, ensure safe condition before operating.
Ensure brake applied, forks lowered, controls neutral before turning key.
| Model | C50sD |
|---|---|
| Fuel Type | Diesel |
| Rated Capacity | 5000 lbs |
| Load Capacity | 5000 lbs |
| Power Type | Internal Combustion |
| Tire Type | Pneumatic |
| Engine Power | Varies with engine selection |