Section 4. Operating Procedures
Starting from a Safe Condition 4-3
Starting from a Safe Condition
Always start from a safe condition. Before operating a lift truck, make
sure that:
1. Parking brake is applied.
2. Forks are fully lowered to the floor or ground.
3. You are familiar with how all the controls function and have read
the Operator Manual.
4. All controls are in neutral or other correct position.
5. Truck has received its daily inspection and is ready and safe to
operate.
Put the direction control
lever in the NEUTRAL
position, before turning the
key switch to ON.
Forks are down
Parking
NEUTRAL
Position
FORWARD
REVERSE
To Next Page
Loading...
