8-12 C60- C80
Engine Coolant Recommendation
Use a mixture of 50% ethylene glycol permanent-type anti-freeze
containing rust and corrosion inhibitor only.
Note: This mixture provides anti-freeze protection level of -37°C
(-34°F), approximately.
Transmission Fluid Recommendation
Use CLARK Specification MS-276A CLARK Part number 2776236.
Hydraulic Fluid Recommendation
Use CLARK Specification MS-68 CLARK Part number 2776239
Hydraulic Oil, with anti-wear additives, or equivalent only.
Truck Weights
- with standard upright. [C60-75 : 3000mm, C80 : 2800mm MFH]
Gross Vehicle
Weight(kg[lbs])
Empty Vehicle
Weight (kg[lbs])
Loaded Drive
Axle (kg[lbs])
Empty Drive
Axle (kg[lbs])
Pneumatic Diesel
C60 15260[33642] 9260[20415] 13926[29313] 4050[8928]
C70 16630[36663] 9630[21230] 14717[32445] 3931[8666]
C75 17144[37796] 9644[21261] 15555[34292] 3998[8814]
C80 18360[40477] 10360[22840] 16186[35684] 4231[9327]
Pneumatic LPG
C60 15110[36332] 9110[20084] 13311[29345] 4066[9863]
C70 16480[36332] 9480[20900] 14732[32478] 3946[8699]
C75 17122[37749] 9622[21212] 15561[34306] 4004[8827]
To Next Page
Loading...
