3-16 Pod Symbols and Functions
• Plus(+) button
1.Increase the data as set value in the current Menu
mode..
2.It performs DR/OP selection function at normal
mode
It selects DR
→ OP in turns, whenever pressing the
button.
The data for the selected mode will be transferred to
T/M controller.
Under S/L mode, DR/OP does not change.
• Minus(-) button
1.Decrease the data as set value in the current Menu
mode.
2.It performs ML/A1/A2 selection function at normal
mode.
It selects ML
→ A1 → A2 in turns, whenever pressing
the button.
The data for the selected mode will be transferred to
T/M controller.
Under S/L mode, ML/A1/A2 does not change.
To Next Page
Loading...
