4-10
Maintenance and Care
Disposing of lubricants, filters and
batteries
• Used parts and lubricants
which arise during repair
work must be stored safely
until they can be disposed of
in accordance with the regu-
lations.
• In this respect, follow the
regulations applicable in your country.
Changing the Wheels
1. Rear driving wheels
To be able to disassemble the wheels previous
experience is needed. If necessary, get in touch with
a CLARK dealer.
1) Park the truck on a firm
and level surface.
2) Turn the key switch to Off
and disconnect the battery.
3) Place wedges behind the
front wheels so as to avoid
any truck movement.
4) Loosen the wheel nuts one
or two turns, turning them
counterclockwise.
To Next Page
Loading...
