4-11
Maintenance and Care
Do not remove the nuts until the wheels are lifted off
the ground.
5) Hold the truck by placing a wooden block under the rear
part of the frame.
6) Remove the nuts completely and change the wheels.
Be sure that the wooden blocks used to hold the
truck are solid and in one only piece.
7) Install back the wheel nuts and snug them tight.
8) Take away the wooden blocks you had placed under the
frame.
9) Lower the tractor slowly and take away the chocks from
the front wheels.
10)Finish the wheel nut tightening, applying the specified
torque.
11) After several hours of operation, tighten the nuts again.
To Next Page
Loading...
