Starting from a Safe Condition 5-5
Section 5. Operating Procedures
Adjusting the armrest of the driver's seat
• Loosen the armrest adjustment
clamping screw (1).
• Move the armrest (2) to the
desired position.
• Tighten the clamping screw (1)
again.
The clamping screw must be
tight.
Central control lever (joy-
stick) operation of mast (1)
and attachments (2)
Use the lifting device and attach-
ments only for authorized appli-
cations. The operator must be
instructed in the handling of the
lifting device and attachments.
Observe the maximum lift
height.
Do not put your hands or any other part of the body into the lift
mast or the space between the mast and truck.
Always operate the control levers smoothly; do not jerk.
The speed of lifting, lowering and tilting is determined by how far the
lever is moved. The lever is designed to return to the neutral position
when released.
Note the operating symbols with arrows.
On the single lever model both functions are operated
simultaneously (e.g. lifting and tilting) when the control lever
is moved to an intermediate position (about 45 ˚ ).
2
1
To Next Page
Loading...
