To Next PageTo Next Page
Need help?Do you have a question about the Clark GCS 17 and is the answer not in the manual?
A message emphasizing the importance of safe operation and maintenance for lift trucks.
Procedures for inspecting the lift truck before operation.
Guidelines for handling trucks with maintenance issues.
Safe procedures for refueling gasoline and diesel fuel tanks.
Safe procedures for refueling LPG fuel tanks.
Fundamental safety rules for operating lift trucks.
Safety considerations related to operating surfaces and truck capacity.
Importance and proper use of seat belts for operator safety.
Rule prohibiting unauthorized personnel from riding on the truck.
Guidelines for interacting safely with pedestrians in the work area.
Instructions to keep body parts within the truck's confines during operation.
Rules for safe travel, including grades and load handling.
Precautions for safe fork operation, including avoiding walking under raised forks.
Safety measures for operating at loading docks, including chocks and plates.
Warnings about pinch points and avoiding injury from moving parts.
Procedures for safely parking the lift truck, including grade and neutral position.
Hazards related to engine operation, like oil and air filters.
Warnings about hazards from fast turns, high loads, and loose loads.
Hazards related to steering, soft shoulders, and overhead clearance.
Hazards from docks, trailers, and carbon monoxide emissions.
Warning about the dangers of slack lift chains.
Diagrams identifying key parts of different truck models.
Detailed descriptions of various truck components and their functions.
Identification and explanation of controls within the operator's compartment.
Information on truck nameplates, capacity plates, and safety warning plates.
Explanation of various safety decals and their warnings.
How the truck's systems and controls function during operation.
Step-by-step instructions for starting gasoline, diesel, and LPG engines.
A detailed guide on performing the essential daily inspection before operation.
Instructions for driving, lifting, tilting, and controlling the truck during operation.
Steps for safely shutting down and parking the lift truck after use.
Safe and correct procedures for jump-starting a truck using jumper cables.
Instructions and precautions for safely towing a disabled lift truck.
Guidance on maintenance frequency based on operating conditions.
A chart outlining maintenance and lubrication tasks at various intervals.
Procedures for checking and changing engine oil, filters, and coolant.
Procedures for checking and maintaining the brake master cylinder fluid.
Procedures for checking and changing hydraulic fluid and filters.
Procedures for checking and changing transaxle fluid and filters.
Procedures for lubricating and adjusting lift chains.
Lubrication points for steer axle linkage, tilt cylinders, and upright bushings.
Procedures for inspecting wheels and tires, including pressure and wear.
Recommended specifications for fuel, engine oil, and coolant.
Key fluid capacities, system pressures, and engine settings.
Torque values for critical fasteners to ensure proper assembly.
General
