To Next PageTo Next Page
Need help?Do you have a question about the Clark GCX 30 and is the answer not in the manual?
Perform a visual inspection of the truck and its components before operating.
Always buckle up seat belts to reduce injuries.
Keep hands on wheel, arms, and legs inside the truck's confines.
Stay with the truck in a tip-over; brace feet and grip the wheel.
Never allow anyone under raised forks; use special equipment for overhead work.
Keep hands, feet, and legs out of the upright; never use upright as a ladder.
Turning too sharp with a raised load can cause tipping even at slow speeds.
Never carry loose or uneven material; stack and band loose material.
Watch overhead structures and avoid tilting loads too far forward to prevent tipping.
Talk to driver, apply trailer brakes, use wheel chocks and locking systems.
Ensure ventilation, avoid idling, never operate in closed or restricted areas.
Detailed checklist for daily pre-operation inspection of the lift truck.
Safe procedures for jump-starting a lift truck using jumper cables.
Instructions for safely towing a disabled lift truck using approved equipment.
General
