To Next PageTo Next Page
Need help?Do you have a question about the Clark GEX 30 and is the answer not in the manual?
Procedure for inspecting the lift truck at the start of each shift to ensure safe operation and identify maintenance issues.
Instructions to keep body parts within the truck's confines and under the overhead guard.
Warnings against walking under raised forks and using lift trucks for personnel lifting.
Alerts operators to keep body parts away from uprights and not use the upright as a ladder.
Explains conditions leading to tip-overs and crucial steps for operator survival if one occurs.
Detailed instructions for operators on how to brace themselves and stay in the seat during a tip-over.
Warns about the dangers of loose or unbalanced loads and provides precautions for secure transport.
Details hazards at docks and drop-offs and essential precautions to prevent trailer movement or tip-overs.
Details essential controls like Key/Start Switch, Seat Adjustment, Parking Brake, Steering, and Directional Lever.
Essential pre-operation checks and understanding of the manual required before using the lift truck.
Ensures the truck is in a safe state before starting, including brake application and control neutrality.
Provides guidelines for safe driving, protecting oneself and others, and understanding truck limitations.
Covers safe practices for picking up, moving, unloading, and stacking loads within capacity limits.
Operator's responsibility to check truck condition for damage, leaks, or unsafe issues before use.
Essential safety warnings and precautions to follow before and during towing a disabled lift truck.
Highlights the importance of maintenance for safety, truck life, and performance, outlining general procedures.
General
