To Next PageTo Next Page
Need help?Do you have a question about the Clark GEX 25 and is the answer not in the manual?
Instructions and importance of using seat belts for operator safety.
Safety precautions related to the use and presence of forks.
Warning about hazardous pinch points on the truck.
Explanation of conditions leading to lateral and longitudinal tip-overs.
Instructions for operator survival during a tip-over incident.
Hazards and precautions associated with handling loose or unbalanced loads.
Hazards related to overhead clearance, speed, and load height.
Safety measures for operating near docks and drop-offs.
Essential checks and understanding before starting truck operation.
Steps to ensure safe startup procedures are followed.
Methods for controlling speed, braking, and plugging operations.
General guidelines for safe operation and operator protection.
Guidelines for safe handling of loads within truck capacity.
Safe practices for traveling with loads, considering stability and visibility.
Steps for safely picking up and moving loads.
Step-by-step guide for safely stacking loads.
Operator's responsibility to check truck condition before use.
Important safety measures to follow before towing a disabled truck.
Step-by-step instructions for safely towing the lift truck.
Importance of regular maintenance for safety and efficiency.
Recommended procedures for safe maintenance operations.
Checking the function of service and parking brakes.
Checking the operation of lift, tilt, and auxiliary controls.
Testing direction control and brake application.
General| Power Source | Electric |
|---|---|
| Rated Capacity | 2500 kg |
| Load Center | 500 mm |
| Battery Voltage | 48 V |
| Lift Speed (loaded/unloaded) | 0.45/0.50 m/s |
| Tire Type | Solid |
