8-28 Lift Truck Maintenance
Checking the traction and hydraulic cables
• Check up the damage of cables and terminal at every sched-
uled PM (500 hrs)
• During inspection, check the following cable condition
Terminal for loosing or corrosion
Insulation for hardening and cracking
Evidence of over heating
Worn or thin insulation
• Do not repair cable by cutting out the damaged section and
splicing.
• Replace the entire cable of traction and pump motors should
be replaced with new cables having over 194F (90C). Inquire
the cable at an authorized CLARK service agency.
To Next Page
Loading...
