9-10 GEX 20-32
Fill Capacities - Fluid Volumes
Drive Axle (total): 2.1 qt (2.0 L)
Hydraulic Sump Tank: 6.3 gal (24.0 L)
Brake Reservoir: 1.0 pt (0.5 L)
Fluid Specifications
Drive Axle Fluid: Mobil #424
Hydraulic Fluid: AW ISO32 (CLARK MS-68)
Brake Fluid: AW ISO32 (CLARK MS-68)
Lubricant Specifications
Axle ends, Wheel bearings:
NLGI Grade No. 1 General Purpose (CLARK MS-9B / MS-107B)
Steering linkage, Upright rails, Rollers, Trunnion bushings, Tilt
cylinder rod ends, brake pedal shaft:
NLGI Grade No. 2 General Purpose (CLARK MS-107C)
Always use genuine CLARK replacement parts.
To Next Page
Loading...
