5-4 Starting from a Safe Condition
Adjusting the Seat
Back Reclining
Adjustment
Fore and Aft
Adjustment
Adjust the seat to a comfortable
position for you. Adjust the seat
by r
otating the release lever
upward at the front under of the
seat. Put the seat in a position
that will provide easy reach to all
controls. Release the seat lever.
Make sure that the seat locking
mechanism is engaged.
Never adjust the driver's seat while the truck is moving,
to avoid the possibility of loss of control and of personal
injury.
Buckling Up
Buckle up. Be sure that you put
on the seat belt. Fasten seat belt
by pushing the flat end into the
buckle until you hear a click.
Connect and adjust the seat belt
strap to a snug, comfortable
position.
Adjust seat belt snuggly across
yo
ur lap and pelvis area, never
across your stomach.
Always wear seat belt low and
snug.
Always wear your seat belt when operating a lift truck.
Starting the Truck
Before you start the truck, make sur
e that you have taken all the
above-mentioned precautions and that the directional control is in
NEUTRAL. To start the truck, turn the key switch clockwise to the ON
position.
To Next Page
Loading...
