Clark S20 D - Page 160

8-2 S20-35, S20-32C
S20-35, S20-32C
CLARK products and specifications are subject to improvements and
changes without notice or obligation.
Model Designation - Rated Load Capacity
NOTICE
Rated capacity applies when using standard upright and
forks. [S20-30(C):3300mm, S32C:3165mm, S35:3165mm
MFH]
Engine
Specifications for EPA engine (S20-35, S20-32C)
S20 D/L/G 1810kg@600mm load center [4000lbs@24in] [2000kg@500mm]
S25 D/L/G 2270kg@600mm load center [5000lbs@24in] [2500kg@500mm]
S30 D/L/G 2720kg@600mm load center [6000lbs@24in] [3000kg@500mm]
S35 D/L/G 3175kg@600mm load center [7000lbs@24in] [3500kg@500mm]
S20C L/G 1810kg@600mm load center [4000lbs@24in] [2000kg@500mm]
S25C L/G 2270kg@600mm load center [5000lbs@24in] [2500kg@500mm]
S30C L/G 2720kg@600mm load center [6000lbs@24in] [3000kg@500mm]
S32C L/G 2950kg@600mm load center [6500lbs@24in] [3200kg@500mm]
Diesel Diesel LPG/Gas LPG/Gas
(Tier3) (Tier4) (Tier0) (Tier4)
Model :
YANMAR
4TNE98
ISUZU
4LE2X
PSI
4G64
FORD
2.5
Cylinders : 4 4 4 4
Displacement
cubic inches : 202 133 143 152
liters : 3.3 2.2 2.4 2.5
Idle RPM : 850 800 800 750
Governed
RPM
High idle : 2725 2650 2650 2550
Rated RPM : 2300 2400 2650 2500
Rated kW : 44.3 46.0 51.6 52.0