EasyManua.ls Logo

Clark S25 L - User Manual

Clark S25 L
170 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
[Do not remove this manual from the truck]
S 20/25/30/35 D,L,G
S 20/25/30/32C L,G
INTERNAL COMBUSTION LIFT TRUCKS
Part No. 8140450 (Eng)
Book No. OM 1067 (Rev 1.9)
Nov. 2019
Question and Answer IconNeed help?

Do you have a question about the Clark S25 L and is the answer not in the manual?

Summary

Section 1. General Safety Rules

Seat Belts

Emphasizes the importance of always buckling up for injury reduction.

Operator Protection

Instructs operators to stay under the overhead guard and within the truck's confines.

Fork Safety

Warns against walking under raised forks and using lift trucks for personnel lifting.

Tip-Over

Explains causes of lateral and longitudinal tip-overs and associated hazards.

What to do in Case of a Tip-over

Instructs operators to stay in the seat, brace themselves, and buckle up if a tip-over occurs.

Section 2. Operating Hazards

Loose Loads

Warns about the dangers of loose or unbalanced loads and provides precautions for stacking.

Long and Wide Loads; Rear Swing

Advises slow speed and clearance checks for long/wide loads and watching for rear swing.

Low Overhead Clearance; Fast Turns and High Loads

Warns about checking clearances and avoiding sharp turns with raised loads to prevent tip-overs.

Drop-Offs

Warns about trailer drop-offs and provides safety measures like wheel chocks and trailer locks.

Chain Slack

Warns that slack chains can cause hang-ups and advises raising forks before moving.

Section 3. Operator Compartment and Controls

Section 4. Operating Procedures

Starting From a Safe Condition

Outlines essential steps to ensure the truck is in a safe condition before starting.

Section 5. Operator Maintenance and Care

Daily Safety Inspection

Details the operator's responsibility for daily visual and functional checks.

Section 6. Emergency Starting, Towing and Lowering

Section 7. Planned Maintenance and Lubrication

Safe Maintenance Practices

Outlines safety standards and recommended practices for industrial truck maintenance.

Clark S25 L Specifications

General IconGeneral
ModelS25 L
CategoryForklifts
Power SourceLPG
Rated Capacity2500 kg
Lift Height3300 mm
Turning Radius2170 mm
Power TypeInternal Combustion Engine

Related product manuals