3-40 Display
Starter Interrupted
To protect starter from overheating, when the key switch is kept
turned to “Start” position for 15 seconds or longer, warning message
is displayed and the buzzer sounds.
Check Engine Controller
Malfunction on engine controller Check error log messages.
Check Truck Controller
Malfunction on truck controller. Check error log messages.
Check CAN Bus Line
Malfunction in the CAN-BUS system. Check error log messages.
Engine Running
Key in Start Position While Engine Running
To protect starter and ring gear from damage, if the ignition switch is
moved to the start position while the engine is running, ENGINE
RUNNING message is displayed and the starter is not activated.
Password Error
A wrong password is used.
VWDUW#LQWHUUXSWHG1#ZDUQLQJ
3330333303333
EDFN
VSQ=######2IPL=
To Next Page
Loading...
