2
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
INTRODUCTION
Thank you for purchasing this CLARKE Ventilation Fan which is designed for
indoor use in an industrial environment.
Read this manual carefully, in doing so you guarantee the safety of yourself
and that of others around you, and you can look forward to your purchase
giving you long and satisfactory service.
SAFETY RULES
Make sure that you read, understand and comply with the following rules.
POSITIONING
• This fan is designed for indoor use only.
• Be aware that the suction capability is considerable. Do not position the
fan where it will blow dust, chips or hazardous fumes at people.
• DO NOT place the fan close to any wet surface. DO NOT place against
any surface such as a wall, door or furniture etc.
• DO NOT place the fan on a raised surface or anywhere it could topple
over.
• Only use the fan in a level position.
• Take care to ensure that the intake grille cannot be blocked by curtains
or other fabrics. Do not allow loose clothing, long hair, jewellery etc. to
be drawn into the intake side of the fan.
• Do not operate the fan in explosive atmospheres such as in the
presence of flammable liquids, gasses or dust such as in a paint spray
booth. Electric motors create sparks which may ignite dust or fumes.
• DO NOT cover the fan or obstruct the air inlet and outlet sections of the
ventilator.
• DO NOT get the fan wet or use in areas of high condensation.
• DO NOT allow the power cable to touch hot surfaces.
• Do not use this fan with a programmable timer used to switch it on
automatically.
PERSONNEL SAFETY
• DO NOT use the fan when you are tired or under the influence of
alcohol, drugs or intoxicating medication.
To Next Page
Loading...
