Clarke CAM6000 - Specifications; Safety Precautions; Cleaning Instructions

- 3 -
SPECIFICATIONS
The CAM6000 is designed for use inside ONLY, it has a powerful steel fan with a fully
enclosed 350w motor. Its thermal protection is perfect for industrial environments. It has a
300° tilt range. The fan can be mounted on the ceiling and is supplied with mounting
bracket.
Model: .................................................................................... CAM6000
Part No: .................................................................................. 3231555
Voltage: .................................................................................. 230 V
Wattage: ................................................................................ 350 W
Speeds: ................................................................................... 3
Dimensions (LWH): ................................................................. 900 x 330 x 990 mm
Weight: ................................................................................... 27.5 kg
LIST OF CONTENTS
Before commencing assembly, check for damage and or shortages etc, any damage or
shortage should be reported to your Clarke dealer where the fan was originally
purchased.
• 1 x Fan Assembly
• 2 x Rubber Feet With Mounting Brackets
• 2 x Moulded Wheels
• 1 x Handle
SAFETY PRECAUTIONS
• DO NOT use in dusty environments.
• DO NOT use in environments with high fumes from chemicals etc.
• DO NOT use as an extractor fan.
• DO NOT use in areas of high humidity/water vapour, i.e. bathrooms etc.
• DO NOT connect fan to ducting system.
Cleaning
• Ensure the fan is switched off, then remove the plug from the socket.
• Do not use any harmful cleaning agents for cleaning.
• Only use a clean soft dampened cloth and wipe dry after cleaning.
• DO NOT bend the blades.
• The motor bearings are permanently sealed and do not require any additional
lubrication.