9
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
STEP 3: ATTACHING THE LEGS
There are 10 legs for the whole garage.
1. Follow Drawing E1. Connect the leg tubes #1, #2 & #6 to create the 4 x
corner legs.
2. Connect leg tubes #1 & #4 to create the 6 x center legs.
3. Insert the Center Legs into the Foot Plate (#19), Align the holes in the pole
and foot plate, push the Pin (#20) through all the holes, insert the split pin
(#21) and split the tongues of the split pin with a flat screwdriver to secure
the connection. (See Diagrams E2, E3 & E4.)
4. Repeat to assemble the other side as; shown in Diagram E.
To Next Page
