2
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
INTRODUCTION
Thank you for purchasing this CLARKE Planer/Thicknesser designed for DIY use.
Before using the machine, please read this manual thoroughly and carefully
follow all instructions given. This is for your own safety and that of others around
you and is also to help you achieve a long and trouble free service from your
new machine.
SPECIFICATIONS
ENVIRONMENTAL RECYCLING POLICY
Through purchase of this product, the customer is taking on the
obligation to deal with the WEEE in accordance with the WEEE
regulations in relation to the treatment, recycling & recovery and
environmentally sound disposal of the WEEE.
In effect, this means that this product must not be disposed of with general
household waste. It must be disposed of according to the laws governing
Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal
facility.
Model CPT800
Voltage 230V~ @ 50Hz
Rated Input Power 1250W
Input Wattage -Max 3.7 Amps
Maximum Depth of Cut 2 mm
Max planing width 204 mm
Min Timber Size -Thicknesser 5-120 mm
Fence Angular Movement
90
o
- 135
o
Cutter Speed 8500 rpm
Dust Extraction Port Diameter 63 mm
Weight 24.5 kg
Dimensions 770 x 449 x 405 mm
Table Dimensions 737 x 210 mm
Sound Power level-measured 99.7 dBLwA
To Next Page