Clas Ohlson AF-02B - Before Initial Use

7
English
Setup
1. Plug thepower cable into anearthed electrical outlet.
2. Press [
] to turn on thefryer. Thefactory default settings are atemperature of
180°C and atimer set to 15min. Thetimer will begin flashing.
3. To change thetimer, press or hold in [ + ] or [ – ].
4. To change thetemperature, press [ ]. Thetemperature will begin flashing.
5. Press or hold in [ + ] or [ – ] to set thetemperature.
6. Press [ ►ll ] to start thefryer.
7. Press [ ►ll ] again if you want to stop frying before thetimer has reachedzero.
Before initial use
• Remove all packaging.
• Clean thepan and basket thoroughly. Useonly mild cleaning agents, never
solvents or corrosive chemicals.
• Rinse well and ensure that thepan and basket are completely dry beforeuse.
Instructions foruse
1. Remove thepan from thefryer.
2. Place theingredients into thebasket.
Donot fill beyond theMAX marking
on theinside of thebasket.
3. Place thebasket in thepan and
push down until thebasket clicks
intoplace. Pushthepan with
thebasket into thefryer, making sure
that it is all thewayin. Neveruse
thepan without thebasket.